|
|
PrintPak Shipping Sleeves For Unframed Artwork
Nickolas Murray
Frida Kahlo on White Bench, New York (ca. 1939)
Courtesy of Throckmorton Fine Art
|
PrintPak Art Shipping Sleeves provide a "container within a container" with multiple layers of protection.
Each PrintPak includes 4 adjustable 90 degree angled corners for custom fitting. Optional hard ABS plastic Puncture-Guard Liners are available to provide extra safety for the shipping of expensive artwork. You might also consider a Liner when shipping long distances or via methods where an increase in the carrier's handling is to be expected.
Each PrintPak can hold 4 to 8 unmatted prints, depending upon the thickness of the paper.
PrintPaks provide an inexpensive and reusable shipping container suitable for land and air transit, with excellent damage survival qualities to withstand the rigors of ground, truck, and air courier handling.
|
For Proper Fitting and Safety
|
Allow 1½" on all sides of the internal dimensions of the PrintPak for safety.
|
| |
PrintPaks are available in Premium and Standard grades.
| 
Atlas Identifies
The Premium Line
|
The Premium lines are carefully engineered to combine the highest quality components available anywhere. They incorporate the strongest grades of Corrugated and available anywhere and are represented by our new Atlas logo. Corrugated material is available in literally thousands of possible variations in board constructions, flute sizes, and shapes, basis weights of its liners and mediums, and adhesives. In the final analysis, the most important resulting element is its Strength.
Corrugated Strength is measured in two different ways. The Bursting Test (sometimes called Mullen) measures the force, in pounds per square inch, required to burst or puncture the corrugated board. This test provides a measure of the corrugated's ability to withstand the rough handling which may be encountered - particularly in small package distribution channels such as FedEx, UPS, and LTL trucking.
The ECT Test measures Stacking capability - in terms of force required to crush a sample of corrugated standing on edge - an indicator of the force required to cause a container to collapse. It is particularly relevant to situations in warehouses, railcars and large trailers where full cartons are stacked high upon one another.
In our Premium Grade, the corrugation Outer Sleeve is 275 Lb Burst Test Single-Wall or 350 Lb Burst Test Double-Wall with corrugation running vertically. The Inner Pak is 350 Lb or 500 Lb Burst Test Double-Wall with corrugation running horizontally.
In our Standard Grade, the Outer Sleeve is 250 Lb Burst Test Single-Wall. The Inner Pak is 48 ECT Test Double-Wall.
The Outer Sleeve and Inner Pak of PrintPaks, Premium and Standard, are designed with corrugation running in opposite directions to prevent bending during transport.
|
Enter the number of items you would like in the boxes below and click "Add" to add them to your cart.
|
|
|
